BOOSTERS
(Single Phase to Three Phase Converters) :
BOOSTER:
Standard converters for multi-motor applications. Motors will produce
100% nameplate torque
continuously, up to 200% during start-up or excessive loads. One output
socket.
BOOSTER
E: High performance converters for all single and multi-motor
applications and all hard-start
conditions. Motors will produce 100% of nameplate torque continuously
and up to 600% during motor start-ups
and excessive loads. Two output sockets. For all motor start-stop,
reverse, hard-start conditions (metal lathes,
wheel balancers, irrigation pumps, conveyors, elevators, refrigeration
systems, compressors, deep submersible
pumps, hydraulic systems...).
Input voltage is 1x 220-240V, output voltage is 3x 380-415V.
|
 |
Booster sizes: 4kW - 6kW - 8kW - 12kW - 16kW - 32 kW - 48 kW - 64 kW (3 - 86 hp).
Booster E are available in sizes: 4kW - 6kW - 8kW - 12kW - 16kW (5,5-20 hp).
Safety and EMC:
Boosters comply with Safety and Wiring Standards in most countries. Boosters are EMC tested and comply with international regulations.
Reliability
No
electromagnetic switch, no contact, no other part with a limited
life-time is used in a Booster.
Motor-generators in Boosters are highly efficient and brushless.
Bearings are greased for lifetime.
APPLICATIONS :
Woodworking:
Saws, spindle moulders, planers, thicknessers, four siders, tenoners,
mortisers, combination machines, woodturning lathes, sanders, routers,
borers, edgebanders and dust extractors.
Metalworking:
Lathes, drills, milling machines, grinders, saws, polishers, shapers,
guillotines, presses.
Agricultural:
Conveyors, grading equipment, mills, mixers, refrigeration units, air
conditioning systems, pumps, hoists, cranes, compressors, wine presses,
olive oil processors, oat and grain mills. Pre cleaners, rubble
separators, seed cleaner, grain cleaners.
Boosters
and hard-starts
For all machines in workshops or on farms, Boosters convert household
voltages into three- phase industrial power. A Booster is a standard
workshop device, a Booster E will also cope with hard-starting machines
and motors.
During motor start-ups, currents for a short moment rise to about 600% of the motors nameplate currents. This is normal, and motor rated fuses and cables cope well with this situation.
When motors start under load, or when excessive load is applied to a motor, high amounts of energy has to supplied for longer period of time. Only a Booster E will generate these currents.
A Booster E can handle start-stop modes, motor reverse mode, motors under excessive loads and motors accelerating inertia. They operate refrigeration systems, compressors, deep submersible pumps, irrigation systems and fast turning metal lathes with heavy chucks.
